Hamilton Beach HBS1200-CE Manual De Operación página 12

Troubleshooting Guide – Status Messages
Displayed Message. . .
BLENDER MOTOR
OVERHEAT—TURN OFF
MAIN POWER SWITCH
INNER HOPPER
NOT IN PLACE
HOPPER LID
NOT IN PLACE
CHECK
DRAIN
CONTAINER CAPACITY
EXCEEDED
JAR NOT IN PLACE
12
Solution . . .
• Electric blender motor is too hot. This can be caused when the
blender jar is too full or when blending very thick ingredients. Reduce
the quantity of product in the jar and allow several minutes for the
motor to cool before blending.
• There is a safety interlock on the inner ice hopper. Make sure that the
inner hopper is properly in place and aligned. See Parts and Features
page for proper alignment.
• There is a safety interlock on the ice hopper lid. Make sure that the lid
is properly in place.
• There is a sensor on the drain that will indicate if water has backed up
in the drain. Check the drain line for blockages or kinks.
• The drink size and number of drinks have exceeded 64 ounces (1.9 L).
• Make sure that the container jar is properly seated on the blender
base. The jar pad sensors prevent the blender motor from starting
if the container jar is not properly seated.