Grounding; Gw 108 3G Ethernet Port Configuration - Intelbras GW 108 3G Guia De Instalacion

5.3. Grounding

Grounding is done with tripolar cable that comes with the product.

5.4. GW 108 3G Ethernet port configuration

The default network configurations available are:
» IP Address: 10.10.10.2.
» Network mask: 255.255.0.0.
» Network gate: 10.10.10.1.
» Port: 61000.
To listen to the IP address, mask, network gateway, and port, the following commands must be inserted:
» Listen to IP address: * + 60 + 997 + *.
» Listen to network mask: * + 60 + 996 + *.
» Listen to network gateway: * + 60 + 995 + *.
» Listen to port: * + 60 + 994 + *.
Note:
before you can listen, make sure the PBX extension has occupied the analog trunk (FXO) connected to a
GW 108 3G FXS, which must be associated with a SIM card already registered with your service provider, and then
enter the commands . If you do not meet these conditions, a Busy logs message is returned.
47