Hoover PLATINUM F8100900 Manual Del Propietário página 20

4. HOW TO CLEAN
Cl e a n in g up h ols te r y
Be sure to check the cleaning code on your upholstery. Use your cleaner only
on upholstery marked "W" or "W/S".
1. Place handle in upright position. Agitator brushes will not rotate while handle
is in upright position.
2. Dry hands and plug cleaner into a properly grounded outlet.
Do not point tools toward people or pets.
3. Gently press the tool onto the fabric. Press the trigger and slowly pull the
nozzle over the fabric.
4. Overlap strokes by 1/2 inch to help prevent streaking.
Make additional strokes without pressing the trigger to remove more moisture.
5. To clean in corners or creases, lift the tool one-half inch from the fabric and
press the solution trigger.
6. Vacuum up the solution with the tool without pressing the trigger. 7. For heavily soiled areas, it may be necessary to repeat the cleaning
process. Make crisscrossing strokes to the original pattern; overlap each
pass (Fig. 4.6).
Make no more than 2 passes with the solution over any one area to prevent
over-wetting and damage to fabric.
If additional cleaning is necessary, wait until the upholstery is completely dry
before using the tool again.
Place hose end firmly into hose pocket after use. Failure to do so could lead
to suction loss.
4.6
19