Picking Up Spills; Maintenance; Nozzle - Hoover FloorMate SpinScrub Manual Del Propietário

piCkinG up spills

Your cleaner may also be used to pick up small
liquid spills (1 quart or less, never to exceed 1/4 inch
in depth) on non-carpeted floors. Turn Mode
selector dial to the WASH position and release the
trigger. Continue to move cleaner over the area to
pick up the spill.
Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure
continued cleaning effectiveness.
Any other servicing should be done by an authorized service representative.

nozzle:

how to Clean
Your carpet cleaner is equipped with removable
brushes for easy cleaning.
CAUTION
!
To reduce the risk of injury from moving parts,
unplug cleaner before servicing.
4.1 Slide the two nozzle release latches (A)
outward.
4.2 Remove nozzle (B) by pulling straight out.
4.3 Rinse nozzle under running water. Remove
debris from squeegee (C) and wipe with a damp
cloth.
4.4 To replace nozzle, make sure latches (D) are out.
Cleaner should be in the upright position for easier
assembly of the nozzle.
Align middle section (E) of nozzle with opening (F)
on cleaner.
4.5 While holding nozzle in place, slide latches
inward to lock in place.

4. MaintenanCe

4.1
A
!
4.3
4.5
11
CAUTION
!
Do not use the cleaner to pick up flammable or
combustible liquids or chemicals. Do not use
the cleaner to pick up detergents that contain
solvent based ingredients.
A
C
!
4.2
b
4.4
e F
d
d