Resetting The System; Pairing The Remote With The Console; Performing A System Software Update - Bose Lifestyle SoundTouch 535 Guía De Uso

Care and Maintenance

Resetting the system

1. Press and hold
status indicator on the control console changes to red.
2. Release on the control console to restart the system.
The system status indicator changes to solid green when the system is on.
Note: If you still cannot operate the system using the remote, try to pair the remote
with the control console.

Pairing the remote with the console

You may need to perform this procedure if you are replacing a remote or if
troubleshooting instructions recommend.
1. Power on your system.
2. Hold the remote close to the control console.
3.
Press and hold
seconds.
The system status indicator blinks when pairing is complete.
4.
Press any remote button and verify that the system status indicator on the
control console blinks with each button press.
Performing a software update
To manually update your system, download the software from the Bose
the USB drive included with your system.
1. Press Setup on the control console to display the UNIFY
2. Select Update.
3. Follow the onscreen instructions.
Note: When performing an update, place your Bose remote near the front of the
control console to ensure it is also up to date.
28 - English
on the control console for five seconds or until the system
on the control console and OK on the remote for five
website to
®
menu.
®