Replacing Filters; Replacing Lights - Vissani QR272S Manual Del Usario

Maintenance
REPLACING HYBRID FILTER
Hybrid filters should be cleaned regularly either by hand or in
the dishwasher, using a warm and mild dish-washing detergent
solution. Replace filters that are damaged with punctures,
bends, or broken frames. When filters require replacement, use
only genuine replacement filters.
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 5W GU10 base
light bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (1) in the direction indicated and pull it out
to remove it .
- Push in the new bulb (2) in the direction indicated until
it locks into the socket . Do not release the bulb until
you are sure the bulb has been securely installed . Then
reconnect the power .
- If new bulbs do not operate, ensure that they are
inserted correctly .
Please contact [email protected] or 1-888-449-9197 between 8:30 am - 5 pm, EST, Monday - Friday for further assistance.
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
will increase the risk of fire.
WARNING:
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
17
Failure to replace worn out or damaged filters
Light bulbs can become hot when turned on .
1
2