Panasonic AW-RP50E Manual De Usuario página 5

How to turn the power of the remote cameras on and off
 How to turn the power of the 
remote cameras off
Follow one of the procedures below to turn off the power of
the remote cameras.
  Turning off the power one camera at a time
  Turning off the power of a multiple number of cameras
• Turning off the power of all the cameras
• Turning off the power of the selected group of cameras
Each of these procedures is described in turn below.
Turning off the power one camera at a time
1
Select the remote camera.
When the corresponding CAMERA STATUS/
SELECTION button is held down, the name of the
remote camera is displayed on the top line of the LCD
panel and POWER ON is displayed on the bottom line.
2
Turn the F2 dial to select "OFF", and press the
F2 dial.
The power of the selected remote camera is turned off.
CAM100<A W- HE 50 >
PO WE R: OF F
POWER ALARM
1 2
MENU PAGE GAIN/PED R/B GAIN R/B PED
6 7
STORE DELETE DETAIL SCENE/MODE CAMERA
PRESET MEMORY / MENU
1 2
IRIS AUTO
CAMERA STATUS / SELECTION
2
F1
F2
F1 CAMERA
OSD
3 4 5
AWB/ABB SHUTTER F2 EXIT
8 9 10
SETUP SYSTEM USER1 USER2
3 4 5
PT ACTIVE
1
Turning off the power of a multiple number of cameras
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set PRESET MEMORY/MENU 8 button
(CAMERA) to ON.
When the button is pressed and its indicator is lit, the
[CAMERA] menu is displayed on the LCD panel.
[ 1] GR OUP
3
Turn the F1 dial to display the [POWER] menu,
and press the F1 dial.
[2 ]POWER
1. CAM POWE R
Turning off the power of all the cameras
4
Turn the F2 dial to select "ALL OFF", and press
the F2 dial.
1 .CAM POWE R
The power of all the remote cameras is now turned off.
Turning off the power of the selected group of
cameras
4
Turn the F2 dial to select "GROUP OFF", and
press the F2 dial.
1 .CAM POWE R
The power of the selected group of remote cameras is
turned off.
4 (E)
▼
Press the F1 dial.
▼
AL L OFF
▼
AL L OFF
▼
GROU P OFF