Specific Safety Information; Equipment Safety; Description, Specifications And Standard Equipment Description; System Components - Ridgid Kollmann SeeSnake FlatPack Manual Del Operador

Kollmann

Specific Safety Information

CAUTION
Read this operator's manual carefully before using
the product. Failure to understand and follow the
contents of this manual may result in electrical
shock, fire and/or serious personal injury.
Camera head can get HOT! Turn
CAUTION
OFF camera while not in use.

Equipment Safety

• Extension cords are not recommended unless they
are plugged into a Ground Fault Circuit Interrupter
(GFCI) found in circuit boxes or receptacles.
• Do not operate the system with electrical compo-
nents removed. Exposure to internal parts increases
the risk of injury.
• Do not place the unit in water. Water entering the
housings will increase the risk of electrical shock.
• Do not use the unit as a chair or table. Dropping or
shocking the unit can result in damage to the unit,
which increases the risk of electrical shock.
• If used on a cart, product and cart should be
moved with care. Quick stops, excessive force and un-
even surfaces may cause the product and cart
combination to overturn.
• Only the camera head and cable are waterproof.
The monitor is splash-resistant only when the Monitor
Shield is covering the monitor screen and the unit is
operating under battery power. Do not expose AC
adapter to damp conditions.
SAVE THESE INSTRUCTIONS!
Description, Specifications and
Standard Equipment
Description
The SeeSnake FlatPack pipe inspection system con-
sists of the FlatPack drum which contains the camera
and push cable, and the Monitor Pack camera control
unit (CCU). The Monitor Pack has a built-in high-resolu-
tion monitor and can be powered from an AC adapter or
rechargeable battery.
The SeeSnake FlatPack pipe inspection system is de-
" to 4" (38mm to 102mm) drain
signed for inspecting 1 1 /
2
lines. Its flexible camera head can negotiate multiple
hard 90° bends and be pushed up to 100' (30m).
The SeeSnake FlatPack drum is a UL Listed accessory, in-
tended for use only with the following UL Listed SeeSnake
4
SeeSnake ® FlatPack and Color FlatPack
Ridge Tool Company
controllers: Monitor Pack, Color Video Tool Case, Color
Monitor + VCR, Monitor + , Monitor

System Components

The SeeSnake FlatPack pipe inspection system contains
the following sub assemblies: Camera Head, Drum, and
Monitor Pack camera control unit. Please take a moment
to learn the functions of each of these components.
(Figures 1-3)
Figure 1 – Drum, Push Cable, Camera Head/Spring,
Interconnect Cord

1) Camera Head

The camera head (Figure 2) has adjustable lighting el-
ements and a highly scratch-resistant sapphire window
(Lens Port). The Camera is rated to a water depth of 330'
(100m).
Spring Assembly
Figure 2 – Camera Head
LED – Light Emitting Diode. The SeeSnake FlatPack
uses infrared LEDs that are invisible to the human
eye but provide the camera's imaging sensor with plenty
of illumination for a clear picture. The Color FlatPack
uses white LEDs that are clearly visible.
LED Window – The donut shaped window that covers
and protects the LEDs from abrasion.
+ VCR, Power + A, Power + .
LED Window