Cleaning The Everclear Doors (Optional) (Fig. 5); Disposal Of The Unit - Arneg BREMA 5 Manual De Instrucciones

Brema5 - Brema LF
English
and water.
- Rinse with clean water and dry using a soft cloth.
- DO NOT use abrasive products and solvents that may in any way alter the surfaces of the cabinets.
- DO NOT spray water or detergent on the electric parts of the cabinet.
- DO NOT use alcohol to clean parts in metacrylate (plexiglas).
Cleaning the internal parts (Monthly)
Cleaning of the inner parts of the cabinet aims at eliminating all of the pathogenic micro-organisms so
as to thus better protect the foodstuffs contained.
Before carrying out the inner cleaning of a cabinet or of a part of one:
- Empty it completely of all the foodstuffs it contains.
- Cut off power supply to the cabinet by means of the main switch.
- Remove all the removable parts such as the display plates, wire trays, etc. and wash in warm water
and detergent containing disinfectant, then dry thoroughly.
- Carefully clean the bottom tray and eliminate any foreign bodies that may have fallen onto the fan
holder casing through the intake grating.
- In the case of abnormal formation of ice, please call a Qualified Refrigerator Technician.
To protect hands during this operation, wear working gloves.
After cleaning the cabinet, replace all the removable elements and connect power. When the cabinet
reaches the working temperature, fill it with the products to be displayed.
N.B.Make sure that fans, ceiling lights, electric cables and any other electric equipment do not
get wet during cleaning.

17.Cleaning the EVERCLEAR doors (optional) (Fig. 5)

WARNING: EVERCLEAR doors are glass doors with a special transparent interior cover that
prevents condensation from forming.
To clean EVERCLEAR doors, keep to the following instructions:
- open and block the door
- carefully clean the interior with a soft, damp cloth appropriate to cleaning parts that may come into
contact with food products
- use neural detergents or soap and water
- change the cloth frequently
- close the door
- clean the exterior wall of the door using neutral household detergents or soap and water
- rinse with clean water and dry using a soft cloth
- DO NOT use abrasive products or solvents that can affect the door surface
WARNING!: DO NOT CLEAN THE DOOR INTERIOR WITH THE SAME PRODUCT
USED TO CLEAN THE EXTERIOR. DO NOT USE ANY ABRASIVE PRODUCTS OR
SOLVENTS THAT COULD AFFECT THE INTERIOR DOOR SURFACES.

18.Disposal of the unit

The unit must be disposed of in accordance with your country's waste management legislation and in
respect of our environment.
This product is considered by current legislation as hazardous waste. It must therefore be collected
separately and cannot be treated as household waste nor sent to a landfill.
Before disposing of the unit, the coolant must be collected and the lubricant oil removed. The user is
responsible for delivering the product for disposal to the collection centre specified by the local
authorities or manufacturer for the recovery and recycling of materials. This product consists of 75%
recyclable materials.
Materials used in construction:
- Iron pipe:
- Copper, Aluminium:
- Galvanised sheet metal:
- Polyurethane foam (R134a):
- Tempered glass:
- Wood:
30
lower frame
refrigeration circuit, electrical system and door frame
motor base, lower varnished panels, base structure
thermal insulation
doors
side frames foamed tank
05060047 03 24/02/2010