Sensor Type - Emerson Warm Tiles ES Manual Del Usuario

10.4.4 Sensor Type 1/2

1
1
3
4
2
5
6
PAGE 54
All Rights Reserved. Used under license by EasyHeat Inc.
This option allows you to choose the type of floor sensor used with the thermostat.
You can thus choose to use an existing sensor with the thermostat, e.g. in
renovation projects.
Choose the sensor actually used from the list.
• Default 10 kΩ (this is the sensor supplied with the thermostat)
• Sensor 12 kΩ
• Custom
1. Tap the "Menu" button on the home screen.
2. Then tap the "Installer Settings" button to access the various installer settings.
3. Tap the "Sensor Type" button.
4. Tap the type of floor sensor actually used.
• Default 10 kΩ (this is the sensor supplied with the thermostat)
• Sensor 12 kΩ
• Custom
5. Confirm your choice by tapping the "Accept" button or discard it by tapping the
"Cancel" button.
6. If "Custom" is chosen, you must provide resistance values for the sensor
concerned at four given temperatures. Ask the supplier of your sensor for these
values.
Tap the "Arrow Up" or "Arrow Down" to set the resistance for the various
temperatures.
<
Contents
>