Adjust - Emerson Warm Tiles ES Manual Del Usuario

9.2.1.1 Adjust... for a few hours
1
2
1
3
4
2
5 5
PAGE 28
All Rights Reserved. Used under license by EasyHeat Inc.
The "for a few hours..." option lets you determine the length of time the displayed
target temperature/setpoint should remain valid. The time set defines when
the thermostat will revert to Scheduled Operation. The period of time until the
thermostat reverts to Scheduled Operation can be set from 15 minutes and up to 24
hours.
You can set the:
• Hour
• Minutes (in 15-minute intervals: 00, 15, 30, or 45)
• AM or PM (if 24-hour time format is selected, this is not applicable)
1. On the home screen, adjust the temperature to the preferred level using the "Arrow Up" and "Arrow Down" buttons.
2. Tap the "Adjust..." button.
3. Then tap the "for a few hours..." button.
4. Tap the "Arrow" buttons for the parameter that you want to change.
5. Confirm your choice by tapping the "Accept" button or discard it by tapping the
"Cancel" button. The thermostat will automatically return to the home screen.
<
Contents
>