Prop 65 Warning; Safety Precautions - DeVilbiss TEKNA PROLITE 703536 Manual De Instrucciones

Safety Precautions

This bulletin contains information that is important for you to know and understand. This information relates to USER SAFETY and PRE-
VENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following symbols. Please pay particular attention to
these sections.
WARNING
Important safety information – A hazard that may
cause serious injury or loss of life.
The following hazards may occur during the normal use of this equipment. Please read the following chart before using
this equipment.
HAZARD CAUSE
Solvent and coatings can be highly flammable or
Fire
combustible especially when sprayed.
During use and while cleaning and flushing, solvents
Solvent Spray
can be forcefully expelled from fluid and air passages.
Some solvents can cause eye injury.
Certain materials may be harmful if inhaled, or if there
Inhaling Toxic Substances
is contact with the skin.
Halogenated hydrocarbon solvents – for example;
Explosion Hazard –
methylene chloride and 1,1,1,-Trichloroethane are
Incompatible Materials
not chemically compatible with the aluminium that
might be used in many system components. The
chemical reaction caused by these solvents reacting
with aluminium can become violent and lead to an
equipment explosion.
Improper operation or maintenance of equipment.
General Safety
Cumulative Trauma disorders Use of hand tools may cause cumulative trauma
disorders ("CTD's").
("CTD's")
CTD's, when using hand tools, tend to affect the upper
CTD's, or musculoskeletal
disorders, involve damage extremities. Factors which may increase the risk of
developing a CTD include:
to the hands, wrists, elbow,
shoulders, neck and back.
1. High frequency of the activity.
Carpal tunnel syndrome
2. Excessive force, such as gripping, pinching,
and tendonitis (such as
tennis elbow or rotator
3. Extreme or awkward finger, wrist, or
cuff syndrome) are examples
of CTD's.
4. Excessive duration of the activity.
5. Tool vibration.
6. Repeated pressure on a body part.
7. Working in cold temperatures.
CTD's can also be caused by such activities as sewing,
golf, tennis, and bowling, to name a few.
Important information that tells how to prevent damage
to equipment, or how to avoid a situation that may cause
minor injury.
or pressing with the hands and fingers.
arm positions.
CA PROP
65
CAUTION
SAFEGUARDS
Adequate exhaust must be provided to keep air free of accumulations of
flammable vapours.
Smoking must never be allowed in the spray area.
Fire extinguishing equipment must be present in the spray area.
Wear eye protection.
Follow the requirements of the Material Safety Data Sheet supplied by your
coating material manufacturer.
Adequate exhaust must be provided to keep the air free of accumulations of toxic
materials.
Use a mask or respirator whenever there is a chance of inhaling sprayed
materials. The mask must be compatible with the material being sprayed and
its concentration. Equipment must be as prescribed by an industrial hygienist or
safety expert, and be NIOSH approved.
Guns with stainless steel internal passageways may be used with these solvents.
However, aluminium is widely used in other spray application equipment – such
as material pumps, regulators, valves, and cups. Check all equipment items
before use and make sure they can also be used safely with these solvents.
Read the label or data sheet for the material you intend to spray. If in doubt as to
whether or not a coating or cleaning material is compatible, contact your material
supplier.
Operators should be given adequate training in the safe use and maintenance of
the equipment (in accordance with the requirements of NFPA-33, Chapter 15).
Users must comply with all local and national codes of practice and insurance
company requirements governing ventilation, fire precautions, operation,
maintenance, and housekeeping. These are OSHA Sections 1910.94 and
1910.107 and NFPA-33.
Pain, tingling, or numbness in the shoulder, forearm, wrist, hands, or fingers,
especially during the night, may be early symptoms of a CTD. Do not ignore
them. Should you experience any such symptoms, see a physician immediately.
Other early symptoms may include vague discomfort in the hand, loss of
manual dexterity, and nonspecific pain in the arm. Ignoring early symptoms and
continued repetitive use of the arm, wrist, and hand can lead to serious disability.
Risk is reduced by avoiding or lessening factors 1-7.

PROP 65 WARNING

WARNING: This product contains
chemicals known to the State of
California to cause cancer and birth
defects or other reproductive harm.
NOTE
Information that you should pay special attention to.
TB-1014-B
5