Button; Call Tones; Channel Scan - Topcom PMR BABYTALKER 1010 Manual De Usuario

21.4 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended If you plan to use your radio in a noisy or windy environment.

21.5 Call Tones

A call tone alerts others that you want to talk.
Press the

button

channel.
21.6 Monitor
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press and hold the
seconds to activate channel monitoring.
• Press the - button

21.7 Channel Scan

CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to
8 including
• Press the - button
flashes on the display and the VOX icon is displayed.
• Press the - button
19
button again to select the VOX sensitivity level which
displayed. Press the
display, to turn VOX OFF.
• Press the PTT - button
mode.
14
briefly. The call tone will be transmitted for 3 seconds on the set
15
- button and the
15
to stop monitoring.
• Press and hold the
briefly to start scanning.
• Release the buttons.
• When an active signal (one of 8 channels) is detected,
CHANNEL SCAN pauses and you will hear the active signal.
• Press the - button
PTT
signal channel.
• Press the - button
• Press the - button
current channel and continue to search for another active
channel
15
3 times, the current VOX setting
19
to turn the VOX feature ON press
18
- button until OF appears on the
20
to confirm and return to stand-by
18
- button for simultaneous for 3
19
- button . Press the
20
to communicate through the active
15
to deactivate channel scan.
19
or the - button
TOPCOM Babytalker 1010
-
15
- button
18
to bypass the
13