Quick Scene Programming - Lutron GRAFIK Eye QS System Manual De Instrucciones

Quick Scene Programming

Save Always Mode
The default save mode (see page 28) is
Save Always. This mode allows you to
quickly set scenes on the lighting column
without entering program mode.
1.Press the button for the scene you want
to set; its LED will light and the lights will
go to the current settings.
2.Use the zone raise/lower buttons to set
all lights to the desired levels. Press the
OK button.
3.To set the fade time for this scene, press
the OK button, then use the master
buttons to set the desired fade time.
Press the OK button to save.
Note: Using the master buttons to raise
or lower lighting settings is still temporary
in Save Always mode.
R
1 2 3 4 5
1. Press the lighting column scene button
you wish to program.
2. Use the zone raise/lower buttons to set
light levels.
3. Use the master buttons to set fade time.
GRAFIK Eye
6
QS System Installation and Operation Guide 15
®
OK