Orascoptic Zeon Endeavour Instrucciones De Funcionamiento página 6

OPERATING INSTRUCTIONS
CONNECTING ZEON
A THROUGH-THE-LENS (TTL) LOUPE
1. Connect the mounting block to the bridge of your
loupe frame . See instructions included with your loupe
connection kit.
2. Secure the LED headlight assembly to the mounting block by
placing the jaw clamp onto the mounting block and tightening
the thumb screw .
3 . Secure the cable to the temple arm using the supplied
spiral temple clip(s).
4 . after the LED headlight is connected to your loupe, place
the loupe on your head and adjust it to a comfortable
working position.
5 . Secure the cable with the gown clip so that the cable does
not hinder the view or the work of the user.
6 . Locate the "LED" connection point on the top of the
battery pack. Connect the LED headlight cable to the
battery pack at the "LED" connection point.
NOTE: When using the LED headlight, or when storing the unit, never bend the cable tightly to avoid
damaging the cable .
CONNECTING ZEON
1 . Secure the LED headlight assembly to the hinge assembly
by placing the connector (that comes attached to the LED
headlight assembly) onto the hinge.
2 . Secure the cable to the temple arm using the supplied
temple clip(s).
3 . after the LED headlight is connected to your loupe, place
the loupe on your head and adjust it to a comfortable
working position.
4 . Secure the cable with the gown clip so that the cable does
not hinder the view or the work of the user.
5 . Locate the "LED" connection point on the top of the
battery pack. Connect the LED headlight cable to the
battery pack at the "LED" connection point.
ZEOn EnDEavOUR™ LED LIGHT SySTEm
®
ENDEAvOUR™ TO
®
ENDEAvOUR™ TO A FLIP-UP LOUPE
®
6