Orascoptic Zeon Endeavour Instrucciones De Funcionamiento página 5

REMOvING THE ADAPTER
1. Press the button on the adapter.
2. Turn the adapter counterclockwise.
3 . Remove the adapter from the power supply .
4 . Retain unused adapters for future use .
CHARGING THE BATTERY PACK
1. Plug the power supply into the electrical outlet.
2 . Locate the "Charger" connection point
on the top of the battery pack.
Plug the power supply connector into the battery pack at the
"Charger" connection point to start charging the battery .
3 . While CHaRGInG, the battery light located at the top left
side of the front of the battery pack turns AMBEr. If the light
does not come on, make sure the battery pack is connected
correctly to the correct power supply and that the power
supply is plugged into an outlet .
NOTE: When the battery is fully charged, ThE AMBEr LIghT
WILL TURn OFF .
4. When the battery pack charge becomes low, the corresponding
LoW BATTEry indicator located on the top right side of the
front of the battery pack will turn on SCArLET. The LoW
BATTEry indicator will start fl ashing SCArLET on and off
when the battery is too low to operate the LED headlamp .
NOTE: The battery pack system is designed to allow for use
of the battery pack while charging.
OPERATING INSTRUCTIONS
ZEOn EnDEavOUR™ LED LIGHT SySTEm
®
5
CHARGING