Electric Connection - Lotus F Serie Instrucciones De Uso Y Mantenimiento

5.2- ELECTRIC CONNECTION

The oven is supplied with a power supply cable located on the rear and without plug (FIG. 6 - Ref. 1).
The electric data are given on the CE marking plate (FIG.1).
THE ELECTRIC CONNECTION OF THE OVEN TO THE MAINS MUST BE COMPULSORILY AND
EXCLUSIVELY PERFORMED BY AN AUTHORIZED TECHNICIAN (ELECTRICIAN) SATISFYING
THE TECHNICAL AND PROFESSIONAL REQUIREMENTS STATED BY THE REGULATIONS IN
FORCE IN THE COUNTRY OF USE OF THE OVEN, WHO MUST ISSUE A DECLARATION OF
CONFORMITY FOR THE INTERVENTION PERFORMED.
THE MANUFACTURER DECLINES ALL LIABILITIES FOR DAMAGES TO PEOPLE, ANIMALS,
AND THINGS CAUSED BY WRONG CONNECTIONS TO THE MAINS.
The connection to the mains must be performed by interposing an automatic or manual switch having
a suitable capacity in which the opening distance between the contacts is at least 3 mm.
The grounding cable must not be interrupted.
The power supply voltage with operating oven must not differ from the value of rated voltage of +/- 10
%.
It is compulsory to connect the device to the ground.
The wiring diagram of the oven can be found in Chap. 11.
ONCE THE ELECTRIC CONNECTION HAS
TECHNICIAN
MEASUREMENT OF THE CONTINUITY OF THE EQUIPOTENTIAL PROTECTION CIRCUIT.
12
(ELECTRICIAN) MUST
FIG.6
BEEN PERFORMED, THE
ISSUE A DECLARATION
1
(Power supply cable)
I NSTALLATI ON - 5
AUTHORIZED
CERTIFYING
Instructions for use and maintenance
Rev. 11/2013 - EN
THE