Stacking Kit; Water Drain; Door Reversal Instructions - Ariston TCL73X Manual Del Usuario

Installation Instructions
Minimum installation clearances:
Closet
Sides / " (15mm)
3
4
Top / " (10mm)
1
2
Rear / " (15mm)
3
4
Front 3 / " (15mm)
4
Vent Opening -
distance from
top of closet 6" (150mm)
If installed in a closet it must have the following dimensions and have two ventilation openings each having an area
72 sq.ins. (450 sq.cm) located 2" (50mm) or 6" (150mm) from top (see table) and 6" (150mm) from bottom of the
door. It must NEVER be installed in a closet with a solid door.
The dryer has adjustable height feet, use these to level the dryer after fitting into its final position.

Water drain

Your dryer needs a drain to discharge the water
condensed during the drying process.
Simply fit the hose provided into this drain, if the dryer
is stacked onto or installed next to a washing machine
it can share the same drain. The drain must be less
than 3' (1 m) above the bottom of the dryer.
! Make sure that the hose is not squashed or kinked
when the dryer is in its final location.

Door reversal instructions

(only if stacked on top of washing machine).
Door Hinge
latch
Hinge
The door of your dryer is reversible and can easily be
changed. Exchange diagonally the hinge brackets
and blanking plugs. Exchange the door latch and
catch with their opposite blanking plates (see above
diagram).
Closet (alternative) Under counter
0 /
3
4" (100m) /
1
/ " (15mm) /
3 3
4
3 / " (15mm) not applicable
4
2" (50mm) not applicable
Door catch
" (15mm)
4
" (10mm)
2
" (15mm)
4

Stacking kit

A stacking kit is available from your dealer, which
allows the dryer to be fitted to the top of an Ariston
washing machine.
Reference number: 72141 White for TCL73X or
72140 Silver for TCL73XS
The kit contains all the necessary brackets and screws.
Tools needed:
No.2 Philips Screwdriver
2mm drill, power or hand drill
SAFETY
For personal safety, DO NOT try to fit the dryer on
top of the washing machine on your own. A second
person should help to lift the tumble dryer onto the
washing machine and to relocate the stacked
washer and dryer.
1. You will need to get to the sides of the washing
machine to fit the stacking kit and dryer. If necessary
pull the machine away from its location to gain
access to the machine to fit the stacking kit and
dryer.
2. Follow the instructions provided with the stacking
kit.
EN
15