Part Description; Headset; Cradle; Small Charging Cradle - LG HBM-800 Manual De Uso

Part Description

Headset

LED indicator(Blue)
for Bluetooth status
LED indicator(Red)
for charging status
Speaker

Cradle

Volume UP
/ Down Button
Speaker
LED indicator(Red)
for charging status

Small Charging Cradle

* Small Charging Cradle is only used for charging the HBM-800 Headset.
4
Call Button
Power Button
Volume UP / Down Button
Protective film
MIC
MFB (Multi-
Function Button)
Charging Port
LED indicator(Blue)
for Bluetooth status
Charging Port

Before Use

- Before using the HBM-800 headset, you will need to remove the
protective film which is covering the contacts on the headset.

Charging

- Attach the Headset to the Cradle.
�The headset will always charge when attached to the cradle, even if
both the headset and cradle are powered off.
�If the cradle battery is empty, the headset will not charge (the LED
indicator on the headset will not turn on, while in the cradle).
- The LED indicator will show a solid red light.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.
- The headset can also be charged using the Small Charging Cradle.
First, connect the charger to the charging port on the Small Charging
Cradle, then attach the HBM-800 headset.

Low battery

- A low battery tone will play once every 30 seconds.
Recharge the battery when the low battery beep is heard.
- If the battery is not charged, the Headset will turn off.

Power on

- Press and Hold the PWR button for 3 seconds.
� The power will turn on and a booting tone will play.

Power off

- Press and hold the PWR button for 4 seconds.
�A shutdown tone will play, the Bluetooth link will disconnect,
and the power will turn off.

Pairing

- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.
- There are 2 Pairing Mode Methods with the HBM-800.

1) Easy Pairing

� With the Power off, press and hold the PWR button for 3 seconds,
to turn on the HBM-800.
� The Headset will enter Auto-Reconnect mode, for 10 seconds (If your
Headset has been previously paired to the handset, the Headset will
automatically reconnect to the handset, when the HBM-800 is powered on.)

How to use Headset

5