JMA MULTICODE DUPLA Manual De Uso página 83

9.6.1 POINTS/CHANNEL JAW ADJUSTMENT
In the jaw adjustment menus we select the jaw (S) we want to adjust. In this case, we select safety keys adjustment.
Adjusting the safety keys jaw is very simple, you have to take the RP tool and put it in the tool holder of the vertical
axis (See Chapter 3.3.2.1 for the RP placement in the vertical head). In the menu we see, we can choose the jaw (M)
we want, and after selecting the jaw, we press the button to adjust the part of the cutter (F); the adjustment process
is automatic.
NOTE: The settings area is very important, the rp tool and the jaw have no swarf.
If we adjust the jaw A1... on the vertical head, it is also convenient that we adjust the safety keys reader 1P (See
Chapter 3.3.2.2 for 1P placement). After finishing the adjustment of the vertical head in the cutter area with RP, lower
the safety keys reader 1P and without moving the jaw A1... adjust the reader pressing the adjustment button (L).
MULTICODE DUPLA
KEY CUTTING MACHINE
83