JMA MULTICODE DUPLA Manual De Uso página 49

MULTICODE DUPLA
KEY CUTTING MACHINE
1. Unthread the knobs (T1) located on the machine. (Fig. 3)
2. Install the tablet support.
3. Thread and tighten the knob to fix the tablet support on the top part of the machine.
4. Introduce the tablet into the support.
T1
FIG. 3
• Use and settings of the tablet support
The tablet support has different settings:
1. Height setting of the upper clamp. Turning the lever (A) clockwise, you can adjust the height of the clamp (B) to
introduce the tablet. After adjustment, block it by turning the lever anticlockwise. Clamps (C) and (D) are adjusted
to adapt to the size of the tablet.
B
A
C D
FIG. 4
49