JMA MULTICODE DUPLA Manual De Uso página 57

• Point limit (1-2-3)
3.1.3 JAW MODELS
The clamp has two standard jaws, a fixed one (A) and a mobile one (B). One of the important characteristics of the
jaws is that they have two sides to attach different models of keys. Both the fixed jaw and the mobile one, have two
sides, 1 and 2.
The following steps are to change the jaw or the side of the jaw:
1) Unscrew the knob (T3) to the end
2) Push the jaw(s) with your fingers from its rear part removing it towards the operator. (Fig. 16)
3) Clean the jaw housing area with the brush.
4) Change the jaw of the side and fully introduce it.
FIG. 16
Note: The information about the jaws to be used appears in the JMAKeyPro software in the tablet.
MULTICODE DUPLA
FIG. 15
KEY CUTTING MACHINE
T3
57