JMA MULTICODE DUPLA Manual De Uso página 77

9.5 CUTTING INFORMATION (FILE)
Once the program is connected to the MULTICODE DUPLA in the JMAKeyPro program, we have access to see the
technical information for cutting the key. If there is no link with the MULTICODE DUPLA machine, this information is
not accessible.
Point or channel key files Keys cut with vertical tool, the jaw of this area has interchangeable clamps according to the
model of key, the software will notify us of the clamp needed at all times. The machine will have to be adjusted each
time the clamps are changed.
9.5.1 POINT KEY FILE
Following the compatibility with the Avantcode machine and the Xcode, the MULTICODE DUPLA machine has the
same names of files. That is why the files of the point and channel keys in "P", 1P, 2P ...
Access to the file is the same way as in the toothed key, by searching for a key (STS) or a tooth code we can see the
series related to that manufacturer or code and by clicking on the file (in this case 305P) we can have access to the
mechanical information.
MULTICODE DUPLA
KEY CUTTING MACHINE
77