JMA MULTICODE DUPLA Manual De Uso página 82

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

To remove the pre-visualization of each element, click on the image again.
Where and how to attach the key?
In jaw, we receive two details, on one hand the jaw which is where the key is attached and on the other side of the jaw
(take into account that the clamps are reversible, A1 is one side of the clamp and A2 is the opposite side, any change
of face will require an adjustment of the jaw and the 1P reader sp that machine is well adjusted).
Limit
Limit
The limit is referenced by the red line drawn on the representation of the cut of the key. That way, this example shows
us Limit 0 for the TP00FI-16P key (at the neck of the key) and Limit 1 in the case of the TP00FO-24P key (at the point of
the key). In the case of Limit 1 using the point limit plate in the channels of face A1 of jaw A1
9.6 JAW SETTING
The MULTICODE DUPLA machine is equipped with an electronic contact to cut point and channel keys are isolated
and have an electronic sensor that detects collision or contact with the key or the jaw. This capacity of the machine
allows us to adjust the machine using the RP tool (points/channel key part in the A1 B1 jaw) placed in the tool holder
of the vertical axis.
To adjust the jaw, go to settings (A) of the application and then choose the adjustment area (B).
82
Tabla de contenido
loading

Productos relacionados para JMA MULTICODE DUPLA

Tabla de contenido