JMA MULTICODE DUPLA Manual De Uso página 65

11
12
13
6.5 1P FEELER REPLACEMENT
1) Switch off the machine using the master switch and unplug the power cord.
2) Raise the front plastic shield.
3) Loosen the holder (T14) using a 2 mm Allen key (T15) and remove the 1P feeler (T16). (Fig. 25)
4) Replace the feeler, pushing it in as far as it will go.
5) Tighten the holder. (T14)
14
16
15
FIG. 24
FIG. 25
MULTICODE DUPLA
KEY CUTTING MACHINE
65