Tabla de contenido
TERM19.CFG
Los valores correctos parta los parámetros de configuración en el archivo TERM19, son:
SBE 19 Terminal Program
TERM19 Set Up Parameters
SBE 19 EPROM (Firmware) Version = 3.0 or Greater
Communication Set Up =
Data UpLoad Set Up Parameters =
Header =
Header Form =
<F1> Help;
<Esc> Exit;
SBE 19 Terminal Program
TERM19 Set Up Parameters
SBE 19 EPROM (Firmware) Version = 3.0 or Greater
——————————————————————————————————————————————————————
Communi
——————————————————————————————————————————————————————
Data Up
Serial Port =
Header
Baud Rate =
Header
Data Upload Baud Rate =
Data Bits =
Parity =
______________________________________________________
<F1> Help;
<Esc> Exit;
4.0
Thursday
<Press Enter to Modify>
<Press Enter to Modify>
Prompt for Header Information
<Press Enter to Modify>
<Enter> Modify the Field
4.0
Thursday
Communication Set Up
COM1
600
9600
7 Data Bits
Even Parity
<Enter> Modify the Field
July 18, 1997
2:50 pm
July 18, 1997
2:50 pm
Tabla de contenido
