Operator's guide:
1)Unpacking instructions
2)The handle
3)Round glass shelving
I
4)Grid shelving
5)Internal cleaning
UK
6)External cleaning
7)Connection to the mains
D
8)Controls
9)Checking correct operation
E
10)Internal cleaning
F
WARNINGS
!
NL
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
P
1. Adults should operate this appliance only. Do not allow children to use the controls or play with it. 2
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
S
installation of the appliance should be carried out by a qualified electrician or other competent person.
4
. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
DK
5
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
6
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs.
7
FIN
. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
prior notice. 8
B
near sources of heat, such as radiators, stoves, etc.
for at least 30 cm.
GR
12
edges.
. If damp air or products to be refrigerated should cause ice to form on the evaporator, we
recommend stopping the compressor and placing the goods in special refrigerated containers, kept at the
CZ
same temperature, until defrosting is completed;if this is not carried out the compressor will continue to
operate leading to a wasteful consumption of electricity and poor performance.
EE
working and unused, it is indispensable to keep the door open at least 30 cm.
light up if the refrigeration is off.
LV
LT
!
Our products are for internal use only – do not install outside restaurants, shops.
H
M
PL
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGE 1a
SK
Remove the nails from the wooden crate with care.
and pallet or crate.
SLO
and level surface. . Make sure there is nothing left in the package before disposal. . Separate the
packaging materials to facilitate disposal (see figure 1).
2. THE HANDLE
1.
The handle can be found in a bag inside the appliance. . Fix the handle base to the door frame using
the two screws already inserted in the holes. Tighten with care. . Place the plastic insert over the handle
and press down until it clicks into place (see figure 2).
3. ROUND GLASS SHELVING
1.
Take the shelves from the cardboard box and place them on the supports of the uprights.
mount the mirror shelf at the bottom (see figure 3).
4. GRID SHELVING
1.
The shelves are in the bottom of the cabinet. . Fit the grids into the height-adjustable supports (see
figure 4)
5. INTERNAL CLEANING
1.
Clean the internal parts and glass panels, using soft cloths and neutral detergents. . Dry with a soft
cloth.
6. EXTERNAL CLEANING
1.
Use the same products as used for the internal cleaning.
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance
11
. Ensure that the products displayed on the shelves and grills do not hang over the
Cut the strap and lift up the cardboard package.
3.
Lift the appliance. . Remove the pallet or crate. . Place the appliance on a flat
6
PRISMA 400 TN/PG
PRISMA 400 TN/PF and PRISMA 400TB/PF
Operator's guide
11)Replacing the internal lights
12)Replacing the door's magnetic gasket
Maintenance manual (Page 48):
1)Cleaning the condenser
2)Cleaning the evaporator
3)Glass panel
4)Wiring diagram diagram of refrigeration unit
10
. Keep the ventilation grills free from obstruction
2.
Insert the forks of a forklift truck between appliance
4
2
3
model
2
6
3
9
13
. If the appliance is not
14.
Do not keep the neon
WOODEN CRATE 1b
5
7
2.
models
2
. It
First