Maintenance And Care; Safety Inspection/ Maintenance Contract - Kärcher HD 4.5/32-4S Eb Manual Del Usuario

Maintenance and care

Danger
Risk of injury by inadvertent startup of
appliance and electrical shock.
First pull out the plug from the mains
before carrying out any tasks on the
machine.
Note
Please dispose off used oil only in the
collection points provided for them.
Please hand over old oil, if any, only at
such places. Polluting the environment
with used oil is a punishable offence.
Safety inspection/ maintenance
contract
You can sign with your dealer a con-
tract for regular safety inspection or
even sign a maintenance contract.
Please take advice on this matter.
Before each use
Check connection cable for damag-

es (risk of electrical shock); get the
damaged connection cable re-
placed immediately by an autho-
rised customer service person/
electrician.
Check the high pressure hose for

damages (risk of bursting).
Please arrange for the immediate
exchange of a damaged high-pres-
sure hose.
Check appliance (pump) for leaks.

3 drops per minute are permitted
and can come out from the lower
side of the appliance. Call Custom-
er Service if there is heavy leakage.
Weekly
Check oil level Please contact Cus-

tomer Service immediately if the oil
is milky (water in oil).
Clean the fine filter.

Unpressurize the appliance.
Unscrew the fastening screws of
the device hood; remove the device
hood.
Unscrew lid with filter.
Clean the filter with clean water or
compressed air.
Reinstall in reverse sequence.
Clean filter at the detergent suck

hose.
monthly or after 500 operating
Oil change.

Oil change
Note
See "Technical Details" for details of oil
quantity and type.
Unscrew the fastening screws of

the device hood; remove the device
hood.
Loosen the oil drain screw at the

rear on the motor casing.
Drain the oil in a collection basin.

Screw in the oil drain screw.

Fill in new oil slowly; air bubbles

should go out.
Attach the lid of the oil container.

Fasten the device hood.

Empty and clean the detergent tank. 
Pull out the locking cap for the de-
tergent tank along with the suction
hose.
Lay the device on the reverse.
Empty and clean the detergent tank.
– 9
EN
hours
If required
11