EPAK Basic Serie Manual página 59

Display Problem
Err Save Error while saving satellite
complete The search for a stored satellite was
successful, but no picture is shown
Sat X No reception of the stored satellite
interchanging
with
no Sig
scanning No receptable satellite in the entire
search range
interchanging
with
complete
Cannot find a satellite
Cannot find a stored satellite
Search for stored satellite takes
longer, even though there are no
obstructions in the view to the
satellite
English Page 24 / 34
Remedy
reoccurs several times, call for
technical assistance.)
Repeat search and storing procedure.
Make sure the boat is not moving and
no superstructures obstruct the sight
to the satellite
- Deactivate Fastscan mode
- Delete satellite storage positions
and memorize again
- Check if superstructures (e.g.
steeple cab) obstruct the sight to the
satellite - if so, move the boat about
3°
- Reception can be briefly interrupted
by passing boats
- Select other program on the receiver
and search again.
- Check, if any superstructures are
obstructing the sight to the satellite
- Check, by using footprint cards
(e.g. www.satcodx.com), that the
boat is inside the coverage area
(footprint)
- Check, if superstructures obstruct
the view to the satellite, and restart
the search mode
- Check, if superstructures obstruct
the view to the satellite
- Delete the stored satellite and restart
the search mode
- Modify angles of the satellite at the
new location with the
function Upd Sat, see chapter
5.2.