Control Elements; Control Unit - EPAK Basic Serie Manual

Find a suitable location for all units within cable lengths, meaning the control unit should be
placed nearby the receiver. Take care that the display of the control unit can be easily read
and the buttons are accessible. Also, allow room for the cables behind the control unit!
The antenna unit is separated from the power supply net by the control unit. Therefore, the
antenna unit only has electric power when the control unit is turned on!
3

Control elements

3.1

Control unit

The EPAK-TV system is controlled by the control unit. See below a short overview of the
key functions:
 Power key: Shortly pressed will turn on power or will enter Standby mode.
 Browse key: Shortly pressed will browse through all available menus and setups or will
cancel a current process.
 Select key: Shortly pressed will select/confirm what is written in the display.
Note! From the Standby mode: Press and hold the Select key while using the Browse key to
scroll through available data: serial no., counter operation time, and software versions ( see
chapter 6.3.).
English Page 10 / 34