Petsafe Staywell 900 Serie Guia Del Usuario página 4

b) In PVC/uPVC/Metal
'Magnetic' cat fl aps will NOT WORK if installed directly into a
***
surface containing metal. The unit must be isolated from these
materials in a wooden frame (not provided).
Using the horizontal line as a base, draw a square with minimum
dimensions of 306mm x 306mm (12
dimensions of your wooden frame).
Cut out the square with a jig or keyhole saw. Fit a wooden frame to the
hole with internal dimensions of 169mm x 169mm (6
cutting template can be used to ensure an accurate cut out.
It is within the wooden frame that your cat fl ap should be fi tted to ensure
that is fully isolated from any metal. (Fig. 4).
FIG.4
Wooden frame
3
PVC/uPVC/Metal ***
1 / " x 12 1 / "). (This will be the external
4 4
"). The enclosed
5 / " x 6 5 /
8 8
306mm
( 12 1 / " )
4
169mm
( 6 5 / " )
8
306mm
169mm
12 1 "
( 6 5 / ) ( / )
4
8"
PVC/uPVC/Metal door
Glass windows & doors,
c) In Glass
single and double glazed*/**
* It is not possible to cut holes in toughened glass or double glazed
units except at the time of manufacture. Please consult a glazier.
** If fi tting a 'Magnetic' model into double glazed glass a plastic
spacer bar must be used. Please consult a glazier.
The cat fl ap requires a circular hole with diameter of 210mm (8
(Fig. 5).
FIG.5
210mm (8 /
1
Not to scale - for best results you should refer
your glazier to the enclosed cutting template.
d) In Walls
Fits brick walls
Follow the instructions for "Wood", by using the enclosed cutting template.
Please note that additional tools, materials and competent DIY skills may
be required.
/
").
1
4
")
4