Loading the batteries
This camera uses 2 CR-V3 lithium battery packs or 4 AA (R6) NiMH batteries,
NiCd batteries, alkaline batteries or lithium batteries.
Important:
● CR-V3 lithium battery packs cannot be re-charged.
● Do not peel the label on a CR-V3 lithium battery pack.
1
Make sure the camera is turned
off;
● The monitor is off.
● The viewfinder is off.
● The lens is not extended.
2
3
Slide the battery compartment
cover in the direction of the
A
arrow (
) with your fingertip
B
and open it (
● Do not use your fingernail, as
this could result in injury.
A
4
).
B
When using
CR-V3 lithium
battery packs
5
Close the battery compartment
cover, then press it down (
and slide it in the opposite
direction of the arrow printed
D
on it (
).
● When pressing the battery
compartment cover shut, be
sure to press the center of the
cover, as it may be difficult to
close properly by pressing the
edge.
● Make sure the cover is
completely closed.
6
Using an AC power adapter
(optional)
Use an AC adapter designed for
the area where the camera is used.
Consult your nearest Olympus
dealer or Service center for details.
En
C
)
C
D
13