Pride Mobility PMV Serie Manual Del Propietário página 13

Throttle Control Lever Switch
This switch dictates which throttle control lever (left or right) will function. See figure 4.
 Toggle the switch to the left to activate the left throttle control lever.
 Toggle the switch to the right to activate the right throttle control lever.
NOTE: Only one throttle control lever will function at a time.
Mirror Positioning and Adjustment
For information on positioning and adjusting your mirror, see V. "Comfort Adjustments."
REAR COMPONENTS
The manual freewheel lever and motor/transaxle
assembly are located on your PMV as shown. See
figure 6. The main circuit breaker (reset button) and
batteries (not shown) are also located on the rear
component section of your PMV.
WARNING! Before placing your PMV
into or taking it out of freewheel
mode, remove the key from the key
switch. Never sit on a PMV when it is
in freewheel mode. Never put a PMV
in freewheel mode on any incline.
Manual Freewheel Lever
Whenever you need or want to push your PMV for
short distances, you can put it in freewheel mode.
1. Remove the key from the key switch.
2. Push forward on the manual freewheel lever to
disable the drive system and the brake system.
This will enable you to push the PMV.
3. Pull back on the manual freewheel lever to reen-
gage the drive and the brake systems and take
your PMV out of freewheel mode.
WARNING! When your PMV is in freewheel mode, the braking system is disengaged.
Disengage the drive motors only on a level surface.

Ensure the key is removed from the key switch.

Stand to the side of the PMV to engage or disengage freewheel mode. Never sit on a

PMV to do this.
After you have finished pushing your PMV, always return it to the drive mode to lock

the brakes.
NOTE: If the PMV is placed in freewheel mode (manual freewheel lever forward) while the key is in
the "on" position, the PMV will not run until the manual freewheel lever is pushed backward and the
key is turned to the "off" position, then back to the "on" position.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your
PMV's batteries into the controlled mechanical energy that drives the PMV's wheels.
PMV Series
I I . Y O U R P M V
Figure 6. Rear Components
IDENTIFICATION KEY
1. MANUAL FREEWHEEL LEVER
2. MOTOR/TRANSAXLE ASSEMBLY
2
1
13