troubleshooting
If you encounter any problem using your camcorder, check the following before
✪
requesting service.
If these instructions do not solve your problem, contact your nearest Samsung
authorized service center.
Symptoms and solutions
Power
Symptom
Explanation/Solution
•
Is "Auto Power Off" set to "6Min"? If no button is pressed
for about 6 minutes in STBY mode, the DVD camcorder is
automatically turned off. To disable this option, Set "Auto
The power turns off
Power Off" to "Off." page 80
automatically.
•
The battery pack is almost exhausted. Charge the battery
pack or replace it with a charged one. Use the AC power
adaptor.
•
Remove the battery pack or unplug AC power adaptor, and
Power cannot be turned off.
connect the power supply to the camcorder again before
turning it on.
•
The ambient temperature is too low.
•
The battery pack is not fully charged. Charge the battery
The battery pack is quickly
pack again.
discharged.
•
The battery pack reached its lifespan and cannot be
recharged. Use another battery pack.
Displays
Symptom
Explanation/Solution
•
Keep away from magnetic materials. When magnetic
The LCD is turned off.
material is near the left side of the DVD camcorder, the
LCD may be turned off but it is not a malfunction.
•
The Viewfinder lens has not been adjusted.
The image in the Viewfinder is
•
Adjust the Viewfinder control lever until the indicators
blurred.
displayed on the Viewfinder come into sharp focus.
The screen of TV or LCD
•
It can occur when recording or viewing a 16:9-ratio image
displays distorted images or
on a 4:3-ratio TV, or vice versa. For more details, see the
has stripes at the top/ bottom
display specification.
or utmost left/right
Unknown indicator appears on
•
A warning indicator or message appears on the screen.
the LCD screen.
pages 103-104
An afterimage remains on the
•
This occurs if you disconnect the AC power adaptor or
LCD screen.
remove the battery pack before turning the power off
The screen is black with
•
Check the lens cover. Open the lens cover if closed.
indicators appeared only.
106_ English
solución de problemas
Si tiene algún problema con la videocámara, compruebe lo siguiente antes de
✪
solicitar el servicio.
Si las siguientes instrucciones no le permiten solucionar el problema, póngase
en contacto con el centro de servicio autorizado de Samsung más cercano.
Síntomas y soluciones
Alimentación
Síntoma
Explicación/Solución
•
¿Se ha definido "Auto Power Off" (Apag. autom.) "6Min"
(6 min.)? Si no se pulsa ningún botón durante unos 6
minutos en modo de espera, la videocámara con memoria
Se apaga
se apaga automáticamente. Para deshabilitar esta opción,
automáticamente.
defina "Auto Power Off" (Apag. autom.) en "Off."
página 80
•
La batería está casi agotada. Cargue la batería o sustitúyala
por una cargada.-Utilice el adaptador de alimentación de CA:
•
Quite la batería o desenchufe el adaptador de alimentación de CA
No es posible apagar la
y vuelva a conectar una fuente de alimentación a la videocámara
unidad.
antes de encenderla de nuevo.
•
La temperatura ambiental es demasiado baja.
•
La batería no está completamente cargada. Cargue de nuevo la
La batería se descarga
batería.
con mucha rapidez.
•
La batería ha llegado al final de su vida útil y no puede recargarse.
Utilice otra batería.
Pantalla
Síntoma
Explicación/Solución
•
Manténgala alejada de materiales magnéticos. Si acerca un
objeto magnético al lado izquierdo de la videocámara con DVD,
Se apaga la pantalla LCD.
es posible que se apague la pantalla LCD, pero no se trata de
ninguna avería.
•
No se ha ajustado la lente del visor.
La imagen se ve borrosa en
•
Desplace la palanca de control del visor hasta que los indicadores
el visor.
que aparecen en el visor muestren que está bien enfocado.
La pantalla del televisor o de
la LCD muestra imágenes
•
Puede suceder al grabar o ver la imagen con una relación 16:9 en
distorsionadas o con bandas
un televisor con una relación 4:3 o viceversa. Para más detalles,
en la parte superior/inferior o
consulte las especificaciones de la pantalla.
izquierda/derecha.
En la pantalla LCD aparece
•
Aparece en pantalla un indicador o mensaje de advertencia.
un indicador desconocido.
páginas 103-104
Una postimagen permanece
•
Esto sucede si desconecta el adaptador de alimentación de CA o
en la pantalla LCD.
retira la batería sin apagar la unidad antes.
La pantalla LCD aparece
•
Compruebe la tapa del objetivo. Abra la tapa del objetivo si está
en negro sólo con los
cerrada.
indicadores.
Español_106