Test Run Mode; Setting Address Of Central Control - LG PQRCHCA0Q Manual De Instrucciones

Test Run Mode

After installing the product, you must a test
Run Mode. For details related to the Product
manual.
1
Press button and
neouslly for more than 3 seconds.
2
Setup figure '01' blinks
3
Press button to start.
4
During the test run, pressing the below
button will exit run.
button Simulta-
Function Code
Value
INSTALLATION INSTRUCTION

Setting Address of Central control

It's the functional to use connecting central
control.
1
Press button and
neouslly for more than 3 seconds.
2
Setup function code '02' pressing by
button.
3
Set group number and indoor number.
Group number
TEMP
Control button
4
Press button to save.
5
Press button and
neouslly for more than 3 seconds After the
setting has been completed.
NOTE
!
• After setup, it automatically gets out of
setup mode if there is no button input
for 25seconds.
• When existing without pressing set but-
ton, the manipulated isn't reflected.
11
button Simulta-
Function Code
Value
button Simulta-