Display - Chauvin Arnoux C.A 6410 Manual De Instrucciones

Model C.A 6415 exclusively
6 : Ω Ω Ω Ω Ω pushbutton
- On alarm reset mode, raises the alarm threshold.*
- On read memory mode, displays the next recording.*
7 : A pushbutton
- In combination with the ON button (secondary function), switches On or Off the
measurement recording mode.
- In reset alarm mode, lowers the alarm threshold.*
- In read memory mode, displays the preceding recording.*
8 : AL pushbutton
- Switches the alarm function On or Off.
- In combination with the ON button (secondary function), switches to reset alarm
threshold mode.
9 : MEM pushbutton
- Records the measured value in Ω (resistance), or A (current).
- In combination with the ON button (secondary function), switches to read
memory mode when you want to reread the recorded values. Also allows you
to reset the memory to zero, by holding the sequence ON + MEM.
* if buttons Ω or A are pressed down and held, the values scroll at a rate of 3 per second,
then 10 per second after they have been pressed for 5 seconds.

DISPLAY

All models
10 : 4 digit LCD digital display
11 : buzzer on
12 : HOLD symbol for display of the last measurement
13 : symbol showing the presence of interference currents in the loop such that the
resistance measurement can not be guaranteed.
14 : symbol showing that the clamp is not correctly closed, so measurement can not,
in this case, be made.
15 : indicates a resistance less than 0.1 Ω, limit below which the accuracy of the
measurement is not guaranteed.
17 : resistance measurement unit
18 : decimal points
19 : service life of the battery as a % of the max. service life
20 : LCD digital display of the battery service life (0 to 100)
21 : low battery symbol
22 : permanent operation (Auto Off cancelled)
31