Vcr Playback Screen Display Control; Monitor 1 - Sony YS-DX316P Manual De Instrucciones

VCR Playback Screen Display Control

While viewing live camera pictures, press the VCR
button to view the VCR playback image. To return to
camera live pictures, press the LIVE button. The VCR
playback screen display control operations are almost
the same as described in "Camera Screen Display
Control".
• If playing back a tape not recorded by this unit, the
VCR indicator will flash and the message "NO ID"
will be displayed on-screen.
• If a camera picture is not recorded, the message "NO
VIDEO" will be displayed on screen.
(Monitor 2)

(Monitor 1)

For split screen viewing
For full screen viewing
For full screen sequential viewing
For zoomed in viewing
Frozen frame viewing
For 4-division split screen sequential viewing
For simultaneous VCR playback and camera live viewing
• To use the time lapse video in the LP mode, we
recommend using the 8-hour mode playback.
Depending on the time lapse VCR (LP mode) you are
using, there may be a slight vertical shaking of the
image or the top of the image may be slightly
distorted during playback in 24- or 40-hour mode.
Note
Audio playback of a time lapse recording in 12 or 24H
mode will cause video interference.
(×2 zoom)
(Camera live picture)
(Freeze frame)
27
(EN)