Lamps Wiring; Final Adjustments And Closing The Door Panel - golmar 2PLUS Manual De Instalación

DOOR PANEL INSTALLATION
L
amps wiring.
Once the nameplate labels are placed, wire the lamps
from all the modules with the terminals L1 and L2 of the
sound module.
IMPORTANT: If there are more than three push buttons
modules, use the EL512 relay to supply the lamps (see
diagram in page 65).
F
inal adjustments.
If after starting the system, it is considered that the audio volume is not
appropriate, do the necessary adjustments as it is shown.
IMPORTANT: Before closing the door panel(s), do a test
call and check all self-testing leds (page 58) don't show
any error.
C
losing the door panel.
Fix the door panel to the embedding box using
the supplied screws and washers.
Finish the door panel assembly by pressing
the closing heads.
In case it is necessary to open the door panel once closed,
use a flat screwdriver to remove the closing heads.
59