E-V. Using The Hob - Der Koch Eltz Manual De Instalación Y Funcionamiento

Plantillas de Vitrocerámica

E-V. Using the hob

Switching the hob top on
This means that the hob has entered stand-by mode.
Switching on a zone and setting a power level
IMPORTANT: A zone must be selected within 1 minute of switching the hob
on.
Switching off a zone
Important: The letter "H" will show in the cooking zone indicator, (see the
section on the "residual heat indicator" below).
Press the ON/OFF button to switch on the appliance.
The hob will beep once and all of the cooking zone indicators
will light briefly, then will go light off.
Press the cooking zone plus button of the zone that you
want to use.
Adjust the zone between power levels 1 and 9, using the
plus and minus buttons. By holding down either of these
buttons, the value on the zone indicator will adjust up or
down.
Press the cooking zone, then press the minus button of the
zone that you want to switch off.
Hold the button down until the number in the cooking zone
indicator reaches "0". After a few seconds, the zone will
switch off automatically.
www.derkochline.com
Ceramic Hob
32