Pentair SIATA SFE-EV PRO Manual De Instrucciones página 14

5 PROGRAMMING
The SFE-EV PRO features 3 different programming levels, one for the user with basic settings, one intermediate
where the user can visualize and modify the most basic parameters of the system, and an advanced menu,
designed for installers and OEM.
To access all the menu a password is required.
Before enter any menu, you will be prompted for a password.
Let us assume in this case that the password to be entered is "2011": modify the digit by pressing the UP
arrow, switch to the next digit by pressing the DOWN arrow, confirm the password by pressing .
Default passwords are:
0000 for Basic menu access
1111 for Intermediate and Advanced menus access.
Password for Intermediate and Advanced menu is unique.
Modify Password
For Basic menu: in Basic menu press both and to enter the changing menu, then modify digits and
confirm new password by pressing .
For Intermediate and Advanced menu: in Advanced menu press both and to enter the changing
menu, then modify digits and confirm new password by pressing .
Changing controller configuration mode
Warnings: Controller mode selection is a sensitive operation. This operation should be performed only to
select controller mode on K-10162 electronic board spare. The manufacturer will not be held liable for any
damages to people or system functionality resulting from an improper setting.
Page 14