Advanced Cd Playback - Denon DN-C615 Instrucciones De Operación

ADVANCED CD PLAYBACK

6
(1) Playing a specific track
(Direct search)
1. Use the number buttons !3 and the +10 button !4
to input the number of the desired track.
• For example, to play track number 4, press
and to play track number 12, press
.
Playback will begin from that track.
(2) Advancing to the next track
during playback
(Automatic search)
button !0 during playback.
1. Press the
9
• The pickup will advance to the beginning of the
next track and playback will continue.
Pressing the button several times will forward
the pickup to the corresponding number tracks.
(3) Returning to the beginning of the
current track during playback
(Automatic search)
button o during playback.
1. Press the 8
• The pickup will return to the beginning of the
current track and playback will continue.
Pressing the button several times will return the
pickup to the corresponding number tracks.
(4) Audible quick search
(Manual search)
• Using this function, you can search for a desired
point quickly with in a track in the both forward or
reverse direction.
) !1 !2 when
• Release the search button ( or
6 7
the desired point has been reached. Normal
playback then continues.
) !1 !2 is pressed
• When a search button ( 6 or 7
during the pause mode and the button is released,
the pause mode is set at that point with the sound
being output.
2 Manual search forward
) !2 during
1. Press the search button (forward) ( 7
playback.
• Playback of the track is sped up.
2 Manual search in reverse
) !1 during
1. Press the search button (reverse) (
6
playback.
• Reverse playback of the track is sped up.
(5) Playing in random order
(Random play)
With this function, the tracks recorded on the disc can
be played in a completely random order.
• When the RANDOM button !8 is pressed, the
,
"RAND" indicator lights and random play begins
and
automatically.
• If the RANDOM button !8 is pressed when the
repeat function is set, the tracks will be played
through once in random order, then played through
again in a different order, etc..
NOTE:
• The random play mode cannot be set while in
the play mode or the program mode.
(6) Repeating playback of a desired
interval
(Single track repeat)
1. Set the play mode to the single play mode.
(Preset function)
2. Press the REPEAT button !9 .
• The "REPEAT 1" indicators light on the display
and the single track repeat mode is set.
3. Use the automatic search buttons (8 and 9)
o !0 to select the track to be played repeatedly.
4. Press the PLAY button (1) y.
• Playback starts.
• Once the selected track ends, it is played again
from the beginning.
• The single track repeat mode can also be set by
pressing the REPEAT button !9 during playback.
The current track is played repeatedly.
• To cancel the single track repeat mode, press
the REPEAT button !9 repeatedly until the
"REPEAT 1" indicator turns off.
(All track repeat)
1. Set the play mode to the continuous play mode.
(Preset function)
2. Press the REPEAT button !9 .
• The "REPEAT" indicators light on the display and
the all track repeat mode is set.
3. Press the PLAY button (1) y.
• The disc is played repeatedly.
• The all track repeat mode can also be set by
pressing the REPEAT button !9 during playback.
• If the REPEAT button !9 is pressed during
programmed playback, the tracks are played
repeatedly in the programmed order.
• To cancel the all track repeat mode, press the
!9
REPEAT button repeatedly
"REPEAT" indicator turns off.
(7) Playing specific tracks in a specific
order
(Programmed play)
• With this function, you can choose any of the tracks
on the disc and program them to play in any order.
• Programming is possible when the disc holder is
open.
• Up to 99 tracks can be programmed.
2 Programming
• Programming is possible when the CD is in the
stop mode.
1. Press the PROG./DIRECT button !7 so that the
"PROG" indicator lights, then use the number
buttons !3 and the +10 button !4 to program the
tracks.
• For example, to program track 3, 12, and 7,
press , ,
• Each time a track is programmed, the number
of that track is displayed on the track number
display, and the total program time is
displayed on the time display. If the total
program time exceeds 99 minutes, only the
first two digits of the minutes are display. (The
third and / or fourth digits are not displayed.)
• "01--00m00s" appears on the time
display if the PROG./DIRECT button !7 is
pressed when no program is set.
• "Full" appears on the time display if you
attempt to program more than 99 tracks.
2 Playing the programmed tracks
) button y to play the tracks 1. Press the PLAY (
1
in the programmed order.
• "01:**Tr", "02:**Tr", etc., appears on
the time display when tracks are selected with
button o !0 .
the or
8 9
2 Clearing the program
1. The entire program is cleared when the
PROG./DIRECT button !7 is pressed again. The
program is also cleared when the OPEN/CLOSE
button w is pressed.
2 Presetting program
• Programs can be stored in the preset memory.
When a disc for which a program is preset is
loaded, the programmed playback mode is set
automatically.
• Programs can be stored for up to three discs.
1. Follow the instructions under "Programming" to
input the program.
2. Follow the instructions under "(2) Presetting
Procedure" to set the preset mode. (See Page
13.)
3. Press the 8 or 9 button o !0 to select
"02:Prg1" (or "03:Prg2" or
until the
"04:Prg3").
) button y.
4. Press the PLAY (
1
• The character display changes as follows :
[Before change]
Prg1 OFF
Prg2 OFF
Prg3 OFF
) button u.
5. Press the STOP (
2
• The preset setting mode is canceled and the
set return to the normal mode.
• To play a preset disc :
Load a disc for which a program is preset.
) button y.
6. Press the PLAY (
1
NOTES:
• Programming is not possible with the disc
holder open.
• During programmed playback, tracks not in the
program can be played by pressing number
buttons !3 and !4 .
, and .
(8) Editing the program
When tracks have been programmed, they can be
called and displayed on the time display.
1. When the or
6 7
programmed track is selected.
• The displayed track can be cleared from the
program by pressing the 0/CLEAR button !3
twice at this time. In addition, if a number button
!3 is pressed, the track corresponding to that
number is inserted in the program before the
displayed track.
• If a track is inserted when there are already 99
tracks in the program, the last track in the
program is cleared.
(9) Playing at a different pitch
1. Press the CD pitch control + and – button !5 !6 to
set the playing pitch.
• Playback begins at the set pitch, and the
"PITCH%" indicator lights.
NOTE:
• When the play speed is changed, the sampling
frequency of the digital output signal also
changes, so it may not be possible to receive
digital signals.
ENGLISH
[After change]
⇒
Prg1 ON
⇒
Prg2 ON
⇒
Prg3 ON
(Call)
button !1 !2 2 is pressed, the
(PITCH)
9