BLUE EMBER GRILLS FGQ65079 Manual Del Usario página 35

FIG.11
HOSE
ASSEMBLY
WIRING
HARNESS
DO NOT PASS HOSE
!
BEHIND THE HEAT
WARNING
SHIELD
FAILURE TO ENSURE THE ABOVE MAY RESULT
!
IN HAZARDOUS FIRE OR EXPLOSION CAUSING
WARNING SERIOUS BODILY INJURY AND/OR PROPERTY
DAMAGE AND INVALIDATES WARRANTY
• Using two people, lower the top cover
assembly carefully onto base and attach as shown.
• Push wiring harness and hose assembly through front
of cart assembly ensuring it goes between heat shield
and front panel opening.
CASTING ASSEMBLY
DANGER: DO NOT PASS HOSE ABOVE SHIELD HOSE MUST NOT
!
DANGER
ENSURE HOSE ASSEMBLY DOES NOT CONTACT THE
CASTING, OR ANY OTHER PARTS WHICH WILL GET HOT.
!
NOTE
NATURAL GAS OR
PROPANE HOSE
(TYPE DEPENDANT
UPON MODEL
PURCHASED)
!
IMPORTANT
TOUCH ANY PART OF THE BASE
WARNING:
SP53-16 (4) 1/4-20
NUT HEX HD FLANGED
SP86-18 (4)
1/4" -20 X .75"
MACHINE SCREW
IMPORTANT
CENTER TABS
UNDER COVER
ASSEMBLY
WITH NOTCHES
IN CABINET.
DIRECT THE HOSE AND
HARNESS TO THE
FRONT OF THE HEAT
IMPORTANT
SHIELD AS SHOWN
SP86-18 (4) 1/4" -20 X .75"
MACHINE SCREW
35
DIRECT THE HOSE AND
!
HARNESS TO THE
FRONT OF THE HEAT
SHIELD AS SHOWN
SP53-16 (4) 1/4-20
NUT HEX HD FLANGED