Installing The Vulcan Motor Reducer Gear Unit - V2 VULCAN Instrucciones De Uso E Instalación

Operador electromecanico irreversible (montaje enterrado) para cancelas batientes

Tabla de contenido

Idiomas disponibles

INSTALLING THE VULCAN MOTOR

REDUCER GEAR UNIT

1. Place the motor reducer gear unit inside the foundation box.

2. Fix the motor reducer in place inside the foundation box by

tightening the 4 nuts.

3. Mount the motor connecting rod on the motor drive shaft and

fix the screw in place using the corresponding self-locking nut.

4. Connect the motor connecting rod to the control rod by

means of the elbow lever.

5. Connect the motor to the control unit, following the

instructions in the following paragraph.

Tabla de Contenido

Tabla de contenido