KENMORE ELITE 665.1471 Manual De Uso Y Cuidado página 13

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Deluxe Adjustable 2-Position Rack
You can raise or lower the top rack approximately 2" (5 cm)
to fit tall items in either the top or bottom rack. Adjusters are
located on each side of the top rack. Each adjuster has two
preset positions.
1. To raise, lift rack until both sides are at the same height
and lock.
2. To lower, depress both tabs on rack adjusters, as shown,
and lower.
Flexible Angle Tines
The row of tines on the left-hand and right-hand sides of the
top rack can be adjusted to make room for a variety of dishes.
Stemware Clips
Use the stemware clips to hold stemware more securely.
Removable Top Rack
The removable top rack allows you to wash larger items, such as pots, roasters, and
cookie sheets, in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from the dishwasher.
To remove the rack:
To gain access to the removable tabs on the tracks/rails, pull the upper rack forward
about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end of the rack out of
the track. Then repeat this step on the other side to completely remove the front end of
the rack.
Then remove the rack by pulling the back end out using a forward and upward motion.
To replace the rack:
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the rack's back end
attachment tabs with the cutout in the track. Push down into place.
Pull the tracks completely out, and align the rack's front-end attachment tabs with the
cutout in the track. Push down into place. You will hear a snap when the front end of
the rack is secured into place on each side.
Stemware clips
13

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido