Carbon Brushes; Disposal Information - Flex CSM 4060 Manual De Instrucciones

Loosen the wing screw (13) and remove

the sawdust guard cover (14).
Remove sawdust and clean the interior

with a paint brush.
Attach the sawdust guard cover (14) and

secure with the wing screw (13).
or
loosen the Allen screws (7) and remove

the sawdust guard (15).
Empty the sawdust guard and re-attach.


Carbon brushes

Regularly check the carbon brushes.
They must move freely in their holder.
They must be changed when their residual
length is below 6 mm.
Note!
Use only original parts supplied by the
manufacturer for replacement purposes.
If non-original parts are used, the guarantee
obligations of the manufacturer will be
deemed null and void.
Unscrew the cover screws (16) on the

carbon brushes with a screwdriver.
Pull out the carbon brushes, clean

and check them. Replace worn carbon
brushes.
Insert the carbon brushes. Screw in the

cover screws (16).
22
Portable circular saw for metals CSM 4060
Repairs
Repairs may be carried out only by
a customer service workshop authorised
by the manufacturer.
Accessories
Accessories
Saw blade
Parallel stop

Disposal information

Danger!
Render redundant power tools unusable
by removing the power cord.
Only for EU countries
Do not dispose of electric tools
together with household waste
material!
In observance of European Directive
2012/19/EC on waste electrical and
electronic equipment and its implementation
in accordance with national law, electric tools
that have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Note!
Please ask your dealer about disposal
options for redundant power tools.
Order no.
312.304
312.312