Troubleshooting; Before Calling For Service - LG DLEX9000 Serie Manual Del Usuario

TROUBLESHOOTING

Before Calling for Service

Your dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early
stage. If your dryer does not function properly or does not function at all, check the following before you call for
service.
Dryer will not
turn on plugged in.
breaker has tripped, or power
outage has occurred.
Dryer does not
heat breaker has tripped, or power
outage has occurred.
(gas models only).
Energy Saver option selected
Greasy or
dirty spots on
clothes
dried together.
Display shows
error code tE1
or tE2
Lint on clothes
Excess static in
clothes after incorrectly.
drying
(overdried).
press, or synthetic blends.
Display shows
error code PS incorrect.
grounded outlet matching the dryer's rating plate.
fuse capacity. If the problem is a circuit overload, have it
corrected by a qualified electrician.
fuse capacity. If the problem is a circuit overload, have it
corrected by a qualified electrician.
shutoff are both fully open.
If using the Cotton/Normal cycle, deselect the Energy
Saver option. The Energy Saver option is selected by
default. This option reduces energy use by adding an air
dry section to the beginning of the cycle. It is normal to
feel no heat at the beginning of the cycle while in Energy
Saver mode.
fabric softener.
because dirty items can soil clean clothes placed in the
same or subsequent loads.
removed during the washing process.
Make sure that clothes are being completely cleaned
according to the instructions for your washer and
detergent.
some loads that produce high amounts of lint, it may be
necessary to clean the filter during the cycle.
towel) and should be dried separately from clothes that
are lint trappers (i.e., a pair of black linen pants).
clothes.
Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.
electricity. Adjust settings and use a shorter drying time,
or use SENSOR DRY cycles.
softener.
Refer to pages 23-27 in this manual.
TROUBLESHOOTING
47