Engine Specifications; Spark Plug; Power Ratings - Sears CRAFTSMAN 536.881501 Manual De Propietario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ENGINE
SPECIFICATIONS
HORSEPOWER
5 HP
DISPLACEMENT
148 cc
BORE
65mm (2.562 in.)
STROKE
45mm (1.750 in.)
GASOLINE
2 quarts (85 octane
CAPACITY
leaded)
OIL CAPACITY
5W30
(16 oz capacity)
SPARK PLUG:
Champion RJ19LM
(Gap .030 in.) or
equivalent
VALVE
Intake: 0.005-0.007
in.
CLEARANCE:
Exhaust:
0.007-0.009
in.
ARMATURE
AIR GAP:
0.006-0.010
in.
POWER RATINGS
The power ratings for an individual
engine model are initially developed by
starting with SAE (Society of Automo-
tive Engineers) code J1940 (Small
Engine
Power
& Torque
Rating
Proce-
dure)
(Revision
2002-05).
Given
both
the wide array of products
on which
our
engines
are placed,
and the variety
of
environmental
issues
applicable
to
operating
the equipment,
it may be that
the engine
you have purchased
will not
develop
the rated horsepower
when
used in a piece of power
equipment
(actual
"on-site"
power).
This difference
is due to a variety
of factors
including,
but not limited
to, the following:
differ-
ences
in altitude,
temperature,
baro-
metric
pressure,
humidity,
fuel, engine
lubrication,
maximum
governed
engine
speed,
individual
engine
to engine
variability,
design
of the particular
piece
of power
equipment,
the manner
in
which the engine
is operated,
engine
run-in to reduce
friction
and clean out of
combustion
chambers,
adjustments
to
the valves
and carburetor,
and other
factors.
The power
ratings
may also be
adjusted
based
on comparisons
to
other similar
engines
utilized
in similar
applications,
and will therefore
not
necessarily
match the values
derived
using the foregoing
codes.
SNOW THROWER
ENGINE
LUBRICATION
Check
the crankcase
oil level before
starting
the engine
and after each eight
(8) hours
of continuous
use. See
Figure
16. Add S.A.E.
5W30
motor oil
as needed.
Synthetic
5W30
is accept-
able for all temperatures.
Tighten
fill
cap/dipstick
securely
each time you
check the oil level.
F-051010C
17
II Fill Cap/D
• Figure 16
NOTE: Oil level must be at FULL mark.
Tabla de contenido
loading

Tabla de contenido