Caring For Your Label Maker - Dymo LetraTag LT-100H Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Caring for Your Label Maker

Your label maker is designed to give you long and trouble-free
service, while requiring very little maintenance. Clean your label
maker from time to time to keep it working properly. Clean the
cutter blade each time you replace the label cassette.
!
The cutter blade is extremely sharp. Use caution when
cleaning.
To clean the cutter blade
1. Remove the label cassette.
2. Place the tip of a ball-point
pen or pencil on the black post
as shown in Figure 6, and press
the post down.
3. While holding the post down,
press and hold the cutter lever
to expose the cutter blade.
4. Use a cotton ball and alcohol to clean both sides of the blade.
5. Release the cutter lever.
You can also follow this procedure if the cutter blade becomes
!
lodged in the forward position and will not move.
18
Print head
Figure 6
Press in
and hold
Tabla de contenido
loading

Tabla de contenido