Tabla de contenido
Idiomas disponibles
Idiomas disponibles
25. WARNING: This heater is not equipped with a device to control the room temperature.
26. Do not use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.
CONTROL PANEL
1) Control panel cover
2) Flame Adjustment Switch
3) Thermostat
4) Other controls
a. Fan (without heating)
b. Heat 900W
c. Heat 900W
d. Flame effect On/Off
OPERATION INSTRUCTIONS
This heater must not be located immediately below a socket outlet.
♦ Insert Plug Into Socket
♦ Open the control panel cover(1)
♦ Select the desired function:
Flame effect On/Off (4d)
-
Fan (4a-Figure 1) (without heating)
-
-
Low heat 900w (4a + 4b or 4a + 4c -Figure 1)
Full heater1800w (4a + 4b + 4c-Figure 1)
-
Heat and Flame effect (4a + 4b + 4c + 4d-Figure 1)
-
♦ It is necessary to switch on the fan to activate heat functions. Without fan heating will not run.
♦ Increase or decrease the flame effect by rotating the flame adjustment switch 2(-Figure 1).
Figure 1
-10-
Tabla de contenido
