EdilKamin MAXIMA 14 Manual De Instalación, Uso Y Mantenimiento página 80

LOCAL SETTINGS
To access the local settings menu, press the
In this menu, you can confi gure the settings for the local interface for communication with the boiler.
Each group of settings has its own tab.
Data/time setting tab
On this tab, you can confi gure the format for displaying the date and time.
Select to display
the time slots
Select to display
the date
Select to enable
programming of
time slots
TAB FOR SETTING THE TEMPERATURE MEASURED BY THE LOCAL SENSOR
In this tab, you can confi gure how room temperature is measured through the temperature sensor on the user panel. Se-
lect the item you want to change (the control will be highlighted), then press the plus/minus buttons to change the value.
Adjust
temperature
reading by
adding an
offset value
Defi nes the
interval of time
between the
temperature
measurements
INSTRUCTIONS FOR USE
.
- 80
-
Select the date
display format
Confi rms the
changes and
exits the menu
Buttons for
increasing/
decreasing
the selected
parameter
Confi rms the
changes and
exits the menu